Kriss Vector "Problems"

View previous topic View next topic Go down

Kriss Vector "Problems"

Post by rogerjohnsen on Wed Oct 01, 2014 8:41 pm

Hello All,

I found this forum looking for some information on some problems I've had with my Kriss Vector. I'm curious if others have had similar issues...

Take Down Pins: I've noticed the lower take down pin at the base plate for the bolt gets "chewed-up" and is developing grooves in the metal. I rotated the other 3 pins and they start showing the same wear after 50-100 rounds.

Ejection Port: I have a number of "chunks" in the metal from spent casings.

Dented Casings: I started saving my brass in the event I ever start reloading (.45 ACP isn't cheap) but noticed the casings are "dented".

I contacted Kriss-USA but it doesn't sound like anyone has reported any problems like this so thought I'd do some research. Any thoughts on the above or similar experiences?


rogerjohnsen

Posts : 7
Join date : 2014-10-01

Back to top Go down

Re: Kriss Vector "Problems"

Post by Bugout64 on Mon Nov 17, 2014 12:37 pm

I too have had issue with numerous dented shell casings...looking forward to any input. Thanks

Bugout64

Posts : 3
Join date : 2014-11-17

Back to top Go down

Re: Kriss Vector "Problems"

Post by Kipp on Tue Mar 29, 2016 2:07 am

They claim its normal ---



On Fri, Jun 19, 2015 at 12:21 PM, David Kawai wrote:
Dear XXXXXXX

We have an estimated 2 – 4 week turnaround time for repair once we receive the firearm.

Otherwise, denting of the brass shells occurs due the the high velocity of the rounds being fired from the Vector. We can still take in your firearm to check the internals and test fire it.

Best Regards,

David Kawai | Customer Service Supervisor

_________________
FNH FS2000
Kriss V CRB
XDM9 CPT
XDS
Tavor FDE
avatar
Kipp

Posts : 158
Join date : 2012-12-18
Location : Illinois

Back to top Go down

Re: Kriss Vector "Problems"

Post by DBLSHOT79 on Sun Nov 13, 2016 11:52 am

I have the same problem. Their reason for the dented brass sounds fishy. My casings are dented in after being fired. I emailed them and I'm waiting for a response.

DBLSHOT79

Posts : 20
Join date : 2016-11-12

Back to top Go down

Re: Kriss Vector "Problems"

Post by DBLSHOT79 on Sun Nov 13, 2016 11:55 am



DBLSHOT79

Posts : 20
Join date : 2016-11-12

Back to top Go down

Re: Kriss Vector "Problems"

Post by Kipp on Sun Nov 13, 2016 12:52 pm

My brass is identical, I send photos of it with my question to them.  Aside from denting the brass, I have no issues what so ever

_________________
FNH FS2000
Kriss V CRB
XDM9 CPT
XDS
Tavor FDE
avatar
Kipp

Posts : 158
Join date : 2012-12-18
Location : Illinois

Back to top Go down

Re: Kriss Vector "Problems"

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum