KRISSTALK
Would you like to react to this message? Create an account in a few clicks or log in to continue.

CRB and SDP owner from CA

3 posters

Go down

CRB and SDP owner from CA Empty CRB and SDP owner from CA

Post by rSydDc Fri Dec 05, 2014 11:12 pm

CRB and SDP owner from CA 20150410

CRB and SDP owner from CA 20150411

CA sucks.


Last edited by rSydDc on Sun Apr 05, 2015 6:11 am; edited 2 times in total
rSydDc
rSydDc

Posts : 32
Join date : 2014-11-18
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by kriss_fresh Wed Dec 17, 2014 8:54 pm

Yes indeed CA does sucks.
kriss_fresh
kriss_fresh

Posts : 12
Join date : 2014-11-29
Age : 39
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by rSydDc Sat Dec 20, 2014 6:53 pm

Stupid bullet button and extended mag restrictions.  I dont wanna get the raddlock because I feel like itll interfere with the way I hold the vector.  The oem bullet button is ridiculously small I had to file down an ar bullet button tool  because I didn't wanna carry a hex wrench everywhere when I shoot.  Thinking about moving to Texas one day where the average iq is way above retarded.
rSydDc
rSydDc

Posts : 32
Join date : 2014-11-18
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by kriss_fresh Sat Dec 20, 2014 9:26 pm

Hahaha,I carry around the small hex attachments to the interchangeable screw drivers, that's a good idea on the AR bullet button tool, thanks for
The tip on that one. I hate that dam bullet button with a passion. I too myself is planning on moving out of California, planing to move to Seattle,WA
kriss_fresh
kriss_fresh

Posts : 12
Join date : 2014-11-29
Age : 39
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by rSydDc Sat Dec 20, 2014 10:02 pm

It was one of those ar bullet button tool rings. Fits on my thumb for quick reloads.
rSydDc
rSydDc

Posts : 32
Join date : 2014-11-18
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by kriss_fresh Sat Dec 20, 2014 10:05 pm

Where did you get it ? Or did you
Ordered it online ?
kriss_fresh
kriss_fresh

Posts : 12
Join date : 2014-11-29
Age : 39
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by rSydDc Sat Dec 20, 2014 10:36 pm

http://www.calegalmags.com/AR-Tool-Ring--Bullet-Button-AR-Ring-Tool-Pack-of-3--SML_p_812.html
rSydDc
rSydDc

Posts : 32
Join date : 2014-11-18
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by kriss_fresh Sat Dec 20, 2014 11:09 pm

Thanks rSydDc might have to order a set
kriss_fresh
kriss_fresh

Posts : 12
Join date : 2014-11-29
Age : 39
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by rSydDc Sat Dec 20, 2014 11:23 pm

Its sturdy as thin as I filed it. Its slightly smaller than the hole on the oem bullet button.
rSydDc
rSydDc

Posts : 32
Join date : 2014-11-18
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by kriss_fresh Sun Dec 21, 2014 1:04 am

Oh ok, with what you just said I was thinking bout just drilling the bullet button a Little bigger ? Or would that be illegal 'cause I taped with the bullet button?
kriss_fresh
kriss_fresh

Posts : 12
Join date : 2014-11-29
Age : 39
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by rSydDc Sun Dec 21, 2014 1:13 am

I dont think it would be but id check with someone who knows for sure. I dont think it would matter because you still need a tool to release the mag.
rSydDc
rSydDc

Posts : 32
Join date : 2014-11-18
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by rSydDc Sun Dec 21, 2014 6:16 am

CRB and SDP owner from CA 20141210

Heres the filed and original tool. Oddly it uploaded sideways.
rSydDc
rSydDc

Posts : 32
Join date : 2014-11-18
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by kriss_fresh Sun Dec 21, 2014 2:10 pm

What did you use to file it down with ? Just a regular nail filer ?
kriss_fresh
kriss_fresh

Posts : 12
Join date : 2014-11-29
Age : 39
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by rSydDc Sun Dec 21, 2014 4:40 pm

Yes just a regular file then used sand paper to try and make it look smooth. I might paint it to make it look clean.
rSydDc
rSydDc

Posts : 32
Join date : 2014-11-18
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by kriss_fresh Sun Dec 21, 2014 6:10 pm

Do you have to magpul AFG 2, on your SDP ? If so are you running the airsoft model or the one for an actual riffle ?
kriss_fresh
kriss_fresh

Posts : 12
Join date : 2014-11-29
Age : 39
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by rSydDc Sun Dec 21, 2014 6:33 pm

Ive thought about getting an afg2 but for the way I hold the sdp theres no point in me getting it. I might get it for my crb when I get my free float adapter made. Its airsoft part but gonna go to a machine shop get it made into high strength aluminum and use the afg on a free float rail.
rSydDc
rSydDc

Posts : 32
Join date : 2014-11-18
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by theviolin3 Wed Feb 11, 2015 9:48 pm

Do you feel accuracy wise they are the same? I just ordered the 6.5" barrel over my original choice of the crb. Silly question but it's bothered me. Though I've committed Im still curious.

theviolin3

Posts : 20
Join date : 2015-01-13

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by rSydDc Thu Feb 12, 2015 10:45 am

Accuracy to me depends on how well the firearm is zeroed out and the skill of the shooter. From what I've read increase in length of barrel doesn't increase accuracy just muzzle velocity. Both can be very accurate. Ive seen videos of the SDP hitting a target at 200 yards. I do favor the SDP more than the CRB but I would buy both all over again if I didn't have them. Hope that helps.
rSydDc
rSydDc

Posts : 32
Join date : 2014-11-18
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by theviolin3 Thu Feb 12, 2015 12:38 pm

If I had to guess we've seen the same videos and when you say velocity do you mean in theory the longer barrel slows the velocity? I made a topic on it but since we started a convo fig I'd ask. Great reply and I'll prob need to get the crb eventually too

theviolin3

Posts : 20
Join date : 2015-01-13

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by rSydDc Thu Feb 12, 2015 8:43 pm

http://www.ballisticsbytheinch.com/45auto.html

This is what I meant by increase in muzzle velocity. With that increase the round will travel straighter longer before it follows the downward trajectory. However, I do believe that the barrel does slow it down some amount. You cant have contact with something and expect to not have any friction or loss of energy.
rSydDc
rSydDc

Posts : 32
Join date : 2014-11-18
Location : California

Back to top Go down

CRB and SDP owner from CA Empty Re: CRB and SDP owner from CA

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum