Kriss Body Rivets

View previous topic View next topic Go down

Kriss Body Rivets

Post by TNKriss on Sun Jan 25, 2015 10:53 pm

I disassembled the carbine for sbr conversion and destroyed the rivets in the dissassembly process. Has anyone replaced these parts? Can I get these from Kriss? Can these be installed with a rivet squeezer or a shop press or will I need a pneumatic rivet gun?

Thanks for your help


Jon

TNKriss

Posts : 2
Join date : 2015-01-25

Back to top Go down

Re: Kriss Body Rivets

Post by Ezveedub on Mon Jan 26, 2015 6:49 am

Are you talking about the rivets that hold the receiver left, right and center steel sections together? If so, you may need to send that to Kriss. I haven't seen one taken apart that far.

Ezveedub

Posts : 46
Join date : 2012-09-28
Location : Florida

Back to top Go down

Re: Kriss Body Rivets

Post by TNKriss on Tue Jan 27, 2015 2:17 pm

Yes. I called Kriss and they will re-rivet the gun. They apparently fixture both receiver sides and the barrel, and place the rivets using a dedicated machine. Thanks for the reply.

TNKriss

Posts : 2
Join date : 2015-01-25

Back to top Go down

Re: Kriss Body Rivets

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum