Is anyone runnng a new 10mm Vector yet?

View previous topic View next topic Go down

Is anyone runnng a new 10mm Vector yet?

Post by EchoLimaBravo on Tue Nov 22, 2016 10:18 am

Or will I be the first on here? Curious to know if there are any hints at time lines or plans for mag extensions with well researched spring weight. I plan on using Arredondo extensions in the mean time. They'll take the capacity to 20 rounds, and work well in a Glock 20 (anything beyond that in a G20 starts to get a bit unwieldy IMHO.)

So many great load offerings in 10mm these days. I'm really excited.
avatar
EchoLimaBravo

Posts : 31
Join date : 2016-11-20
Location : Michigan

Back to top Go down

Re: Is anyone runnng a new 10mm Vector yet?

Post by EchoLimaBravo on Thu Nov 24, 2016 10:35 am

Ordered a SDPSB yesterday in 10mm. Only found black in stock anywhere (was hoping for OD). It'll likely be a little delayed with the holiday, but it's on its way.

_________________
Don't let fortuitous outcomes reinforce bad tactics. Wisdom demands better of you.
avatar
EchoLimaBravo

Posts : 31
Join date : 2016-11-20
Location : Michigan

Back to top Go down

Re: Is anyone runnng a new 10mm Vector yet?

Post by techspec6 on Sat Dec 03, 2016 10:08 am

Just got my FDE Kriss Vector in 10mm. Packs quite a punch! Loving it!

-Jason

techspec6

Posts : 4
Join date : 2016-12-03

Back to top Go down

Re: Is anyone runnng a new 10mm Vector yet?

Post by jsha22lr on Sun Dec 04, 2016 9:21 pm

We have one, but it hasn't sold just yet.

jsha22lr

Posts : 43
Join date : 2016-11-24

Back to top Go down

Re: Is anyone runnng a new 10mm Vector yet?

Post by Cali74 on Sat Jan 28, 2017 9:27 pm

Took my 10mm Gen II carbine to the range for the first time and enjoyed it.
Kick is more robust than the 9mm but the holes it make in the target remind you what the extra fun is about.
Only disappointment was the stock feeling like it flexed a bit when you drew the carbine in tight and that the first hundred rounds I ran beat the heck out of the brass.
I'm not sure if it was the quality of the S&B ammo but the brass was noticeably dented due to the heavy ejector spring.  
Always an easter egg hunt tracking down 10mm brass as those boys go a flying.  
Hope to see other reports with the 10mm set ups.  
Wish I could have the pistol version but CA is one step from not allowing my carbine.

Cali74

Posts : 1
Join date : 2016-10-20

Back to top Go down

Re: Is anyone runnng a new 10mm Vector yet?

Post by Ljungmann on Fri Feb 17, 2017 10:12 pm

i looked at 10mm but the price of 10mm around me is ridiculous as all get out. I dont reload and dont want to void warranty by running reman through - so i opted for the 9mm. I may purchase a 10mm later once I have a workshop again to reload and am more comfortable working on the Kriss my self.
avatar
Ljungmann

Posts : 6
Join date : 2017-02-13

Back to top Go down

Re: Is anyone runnng a new 10mm Vector yet?

Post by rodentman on Sun Feb 19, 2017 11:08 am

I am on my way to the range to run the 100mm for the first time. Just got the carbine yesterday. I have never bought any factory ammo other than rimfire, so we'll see how my various reloads perform. I am anxious to see.
avatar
rodentman

Posts : 5
Join date : 2017-02-17

Back to top Go down

Re: Is anyone runnng a new 10mm Vector yet?

Post by rodentman on Sun Mar 05, 2017 11:42 am

Had more FTF's than I would have liked. I would have liked none. Took it out again with some hotter loads, 9.5g 3N37 with 180g Nosler. Speer is the only book going that high on that powder. Anyway, still FTF's and very poor accuracy on target.

Went back to my softer loads of 7.5 Unique with the 150g Nosler. That is completely reliable and much better on target. I will probably relegate the other loads to my 610 which can handle anything. In fact I still have the fantasy of boring it out to 10mm mag someday...

I like the Kriss but I hate the misfires. And yes it does beat the crap out of the brass, at least the pieces I can find. Even indoors...I don't know where they end up, in the Twilight Zone somewhere. Well, BFD I have plenty and brass is cheap enough from Starline.
avatar
rodentman

Posts : 5
Join date : 2017-02-17

Back to top Go down

Re: Is anyone runnng a new 10mm Vector yet?

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum