Kriss SBR questions

View previous topic View next topic Go down

Kriss SBR questions

Post by Narkcop on Sun Jun 03, 2012 9:49 pm

Got my tax stamp and cut my barrel now where do I put the engraving? Also what is the barrel diameter? because I intend on cutting thread's it doesn't look too difficult from youtube videos.

Narkcop

Posts : 3
Join date : 2012-06-03

Back to top Go down

Re: Kriss SBR questions

Post by Solscud007 on Sun Jun 03, 2012 11:38 pm

Good question. I don't know. Can engraving go onto polymer? Otherwise you might have to remove material from the polymer housing to expose the metal underneath.

_________________
Most of the information I find and collect about the Kriss is documented on my facebook page.
http://www.facebook.com/pages/Kriss-Super-V/157275704339968
avatar
Solscud007
MOD

Posts : 1580
Join date : 2012-01-05
Age : 37
Location : Pittsburgh, PA

http://www.facebook.com/pages/Kriss-Super-V/157275704339968?sk=w

Back to top Go down

Re: Kriss SBR questions

Post by Narkcop on Wed Jun 06, 2012 7:42 am

Well next week the SBR is getting engraved on the reciever and now to find the thread cutter so I can put a flashider on the barrel.

Narkcop

Posts : 3
Join date : 2012-06-03

Back to top Go down

Re: Kriss SBR questions

Post by mambro on Fri Jun 08, 2012 1:12 am

Narkcop wrote:...Also what is the barrel diameter?

Depends on the year, but my guess from the picture is 15mm. This thread has mention of sizing:

http://www.krisstalk.com/t88-kriss-vector-factory-revisions

This thread has some interesting comments on re-threading for Metric vs. Standard:

http://www.krisstalk.com/t205-rethreading-the-sdp-barrel-with-pics

There are also at least a couple of manufacturers of flash hiders for .45ACP threaded for metric (primarily for the HK fans) that I know of that will work, if you don't have a source already in mind. (Unfortunately, AAC has no plans for their Blackout in pistol calibers.)

avatar
mambro
MOD

Posts : 604
Join date : 2012-01-08
Location : McKinney, TX

Back to top Go down

Re: Kriss SBR questions

Post by mambro on Fri Jun 08, 2012 2:26 pm

Are you running another optic on the rail where you needed the space and had to flip the front sight around?
avatar
mambro
MOD

Posts : 604
Join date : 2012-01-08
Location : McKinney, TX

Back to top Go down

Re: Kriss SBR questions

Post by beltfed on Thu Jun 14, 2012 1:11 pm

My 2 cents.

Notice that KRISS actually engraved their info on the steel of the barreled frame? Then they have the molded holes in the plastic housing to expose the manufacturers info underneath.

ATF states that the engraving must be in plain sight and not easily defaced. I am wondering if the plastic body is not good enough to fall into that criteria.

I have seen ATF instruction stating that the barrel can be engraved which is probably what I will end up going with. The engraving cannot be on any part of the firearm that is easily removable either and as we know the barrel of the KRISS cannot be removed.

Nark, who are you gonna have thread you barrel?

beltfed

Posts : 68
Join date : 2012-03-11

Back to top Go down

Re: Kriss SBR questions

Post by Solscud007 on Thu Jun 14, 2012 1:14 pm

Do we have sample pictures of the SBR engraving? Can someone post it? You can blur out sensitive information. I'm just curious where the factory KRISS engraving would be on the lower receiver.

_________________
Most of the information I find and collect about the Kriss is documented on my facebook page.
http://www.facebook.com/pages/Kriss-Super-V/157275704339968
avatar
Solscud007
MOD

Posts : 1580
Join date : 2012-01-05
Age : 37
Location : Pittsburgh, PA

http://www.facebook.com/pages/Kriss-Super-V/157275704339968?sk=w

Back to top Go down

Re: Kriss SBR questions

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum