Project affordable KRISS Vector case

Page 2 of 2 Previous  1, 2

View previous topic View next topic Go down

Re: Project affordable KRISS Vector case

Post by mambro on Fri Feb 22, 2013 12:41 am

DemskeetSkeet wrote:...Does anyone know of a smaller case similar to this but deep enough to carry the Vector with the stock folded?
This same case also comes in a 36" size. You might be able to put the Vector in facing the other direction with the stock folded.

http://www.amazon.com/Plano-108360-Guard-Tactical-Case/dp/B0029KKWT8

scratch
avatar
mambro
MOD

Posts : 600
Join date : 2012-01-08
Location : McKinney, TX

Back to top Go down

Re: Project affordable KRISS Vector case

Post by DemskeetSkeet on Fri Feb 22, 2013 12:50 am

mambro wrote:
DemskeetSkeet wrote:...Does anyone know of a smaller case similar to this but deep enough to carry the Vector with the stock folded?
This same case also comes in a 36" size. You might be able to put the Vector in facing the other direction with the stock folded.

http://www.amazon.com/Plano-108360-Guard-Tactical-Case/dp/B0029KKWT8

scratch

Definitely looks thick enough! Like you say I could flip it around so the gun sits flat and the stock is towards the lid. I'm sure I could still fit my Glock 21, 2 13 round mags, and 7 25+ mags in there.

I must ponder this for a while.....

DemskeetSkeet

Posts : 40
Join date : 2012-10-10

Back to top Go down

Re: Project affordable KRISS Vector case

Post by Streetsnake on Sat Feb 23, 2013 12:21 am

This will be a fun project after I get the vector finished out. I wouldn't suppose you would share the different thicknesses of foam you used? I was going to start researching where to get the foam from. Thanks

Streetsnake

Posts : 3
Join date : 2013-02-17

Back to top Go down

Pelican 1750 update (URL)

Post by patapp2024 on Thu Jul 11, 2013 2:25 pm

I plopped down the $ for the Pelican through Amazon, as they currently have it on sale. I figured $80 for the added features/durability is worth it. I also have a local foam company that will custom fit a foam blank to the case, but they won't cut. So...I'll buy a blaze red blank for the bottom and some firmer poly (assuming I'll want/need to) for the upper. Scripto tracing and bread knife cutting and I should be good to go violent . Once I get my Vector (lol, already getting stuff for it), I'll post some pics.

http://www.amazon.com/Pelican-1750-Case-Rifle-Black/dp/B000AOMA1S/ref=sr_1_1?ie=UTF8&qid=1373563573&sr=8-1&keywords=pelican+1750

patapp2024

Posts : 2
Join date : 2013-07-11

Back to top Go down

Re: Project affordable KRISS Vector case

Post by Jubz on Thu Oct 03, 2013 2:51 pm

A little trick I came across re: foam cutouts, use an electric kitchen (carving) knife. Lay your gear in reverse on the foam, trace with a Sharpie, cut out with the e-knife, then flip it over.

avatar
Jubz

Posts : 15
Join date : 2013-07-11
Location : SoCAL

Back to top Go down

Re: Project affordable KRISS Vector case

Post by Sponsored content


Sponsored content


Back to top Go down

Page 2 of 2 Previous  1, 2

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum