Parting out NIB Vector. Need input, what are the parts worth?

View previous topic View next topic Go down

Parting out NIB Vector. Need input, what are the parts worth?

Post by hkbeltfed on Sun Nov 04, 2012 8:10 pm

I'm parting out a NIB Vector rifle. I bought a SDP and a rifle, then SBR'ed the pistol. I removed the end plate from the SDP and discovered the "nut" inside the upper polymer housing preventing the installation of the stock. So, I cut a rectangular slot in the top and took it out. Later, I just took the upper housing and stock off the rifle and swapped it with the SDP. So, I have the following for sale and would like input as to what they're worth...

Folding sight set
Sling in package
Complete bolt group
Complete "upper" SDP polymer housing, with rail trigger mech, etc, albeit modified as detailed above
Complete rifle "receiver" with "lower" polymer housing, with barrel, trunnion, charging handle, bolt catch, mag catch, etc
Rifle barrel shroud

For that matter, should I disassemble the "upper" and "lower" assemblies and part those out too? Your input is appreciated.

Thanks in advance!

hkbeltfed

Posts : 25
Join date : 2012-11-04

Back to top Go down

Re: Parting out NIB Vector. Need input, what are the parts worth?

Post by Solscud007 on Sun Nov 04, 2012 9:24 pm

Hmm, it really depends on the people who want it.

Which folding sights are they? Troy? Diamond? Midwest Industries?

Sling isn't with much so you may take a hit on that.

To be honest I would order a new upper rail and folding stock from our vendor, black label tactical and complete the rifle. Then sell the rifle.

I am interested in the pistol SDP end plate and parts.

_________________
Most of the information I find and collect about the Kriss is documented on my facebook page.
http://www.facebook.com/pages/Kriss-Super-V/157275704339968
avatar
Solscud007
MOD

Posts : 1580
Join date : 2012-01-05
Age : 37
Location : Pittsburgh, PA

http://www.facebook.com/pages/Kriss-Super-V/157275704339968?sk=w

Back to top Go down

Re: Parting out NIB Vector. Need input, what are the parts worth?

Post by hkbeltfed on Sun Nov 04, 2012 11:05 pm

I have 2 sets of the Midwest Industries sights. I've tried to purchase the polymer upper housing from Kriss, but they won't sell them. I've taken your advice and contacted Black Label Tactical.

If anyone has any input on pricing, it's appreciated.

hkbeltfed

Posts : 25
Join date : 2012-11-04

Back to top Go down

Re: Parting out NIB Vector. Need input, what are the parts worth?

Post by Solscud007 on Sun Nov 04, 2012 11:08 pm

I might have a use for your upper receiver. If you want the prototype stock. I think my friend and I can get it done. I'm too busy shooting my Kriss to send the part to be scanned.

_________________
Most of the information I find and collect about the Kriss is documented on my facebook page.
http://www.facebook.com/pages/Kriss-Super-V/157275704339968
avatar
Solscud007
MOD

Posts : 1580
Join date : 2012-01-05
Age : 37
Location : Pittsburgh, PA

http://www.facebook.com/pages/Kriss-Super-V/157275704339968?sk=w

Back to top Go down

Re: Parting out NIB Vector. Need input, what are the parts worth?

Post by hkbeltfed on Thu Jan 17, 2013 10:00 pm

If anyone cares, I put them on Gun Broker...
http://www.gunbroker.com/All/BI.aspx?IncludeSellers=762165

hkbeltfed

Posts : 25
Join date : 2012-11-04

Back to top Go down

Re: Parting out NIB Vector. Need input, what are the parts worth?

Post by CatMostFeared on Thu Jan 17, 2013 10:41 pm

Sent u a pm
avatar
CatMostFeared
Admin

Posts : 799
Join date : 2012-01-05
Age : 48
Location : Kentucky

http://www.krisstalk.com

Back to top Go down

Re: Parting out NIB Vector. Need input, what are the parts worth?

Post by CatMostFeared on Thu Jan 17, 2013 11:04 pm

All take it all partytime
avatar
CatMostFeared
Admin

Posts : 799
Join date : 2012-01-05
Age : 48
Location : Kentucky

http://www.krisstalk.com

Back to top Go down

Re: Parting out NIB Vector. Need input, what are the parts worth?

Post by CatMostFeared on Sat Jan 19, 2013 9:35 pm

Well if I don't win the auctions at least I will run up the bid
avatar
CatMostFeared
Admin

Posts : 799
Join date : 2012-01-05
Age : 48
Location : Kentucky

http://www.krisstalk.com

Back to top Go down

Re: Parting out NIB Vector. Need input, what are the parts worth?

Post by hkbeltfed on Sun Jan 20, 2013 1:47 pm

Thanks, either way!

hkbeltfed

Posts : 25
Join date : 2012-11-04

Back to top Go down

Re: Parting out NIB Vector. Need input, what are the parts worth?

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum