Hello from Concord, CA

View previous topic View next topic Go down

Hello from Concord, CA

Post by ecuadorian on Thu Nov 29, 2012 4:51 pm

I'm new here and happy new owner of a Kriss Vector crb.
Took it to the range yesterday.... and I was very pleased on how well that thing shots. I fired 100 rds of pmc 230gr fmj, and no malfunctions!!!! Which I was very concern before I got it.... But so far so good!!! I did felt a recoil.... I think after 10 hours of youtube footage and 100's of reviews, I was expecting a 22 cal kick, but It wasn't bad at all, I was able to rapid fire and keep the target on sight, no muzzle climb, but instead, lil move to the right which I got used to after the first 50 rds. Overall I liked it a lot and I'll be using it more than my other guns..... well.... for now =)

ecuadorian

Posts : 8
Join date : 2012-11-29
Age : 35
Location : Concord, CA

Back to top Go down

Re: Hello from Concord, CA

Post by Xn0r on Thu Nov 29, 2012 8:23 pm

You go to diablo? Looks like a good range.

_________________
FN SCAR 17S, Kimber Tactical Custom II, Kriss Vector CRB, Kahr PM9, M1 Garand (CMP HRA SGS)
avatar
Xn0r

Posts : 98
Join date : 2012-08-16
Age : 49
Location : Santa Clara, CA (Silicon Valley)

Back to top Go down

Re: Hello from Concord, CA

Post by ecuadorian on Fri Nov 30, 2012 12:53 am

Yes, the one in Concord, Chabot in Oakland and San Leandro rifle & pistol. The one in Concord is really good and close by for me, usually i go there on sundays.

ecuadorian

Posts : 8
Join date : 2012-11-29
Age : 35
Location : Concord, CA

Back to top Go down

Re: Hello from Concord, CA

Post by Xn0r on Fri Nov 30, 2012 2:37 am

Yeh Chabot and Concord have 200 yd ranges I think (I know chabot does). Been wanting to check those out for a while. Closest outdoor to me is Sunnyvale, so I usually go there.

_________________
FN SCAR 17S, Kimber Tactical Custom II, Kriss Vector CRB, Kahr PM9, M1 Garand (CMP HRA SGS)
avatar
Xn0r

Posts : 98
Join date : 2012-08-16
Age : 49
Location : Santa Clara, CA (Silicon Valley)

Back to top Go down

Re: Hello from Concord, CA

Post by ecuadorian on Fri Nov 30, 2012 2:07 pm

I work in oakland, so outdoor ranges don't work for me during the week, they close at 5 (get off at 4:30) the one in san leandro closes at 9 pm, I go there twice a week.

ecuadorian

Posts : 8
Join date : 2012-11-29
Age : 35
Location : Concord, CA

Back to top Go down

Re: Hello from Concord, CA

Post by Xn0r on Fri Nov 30, 2012 5:25 pm

Yeh. Same for me. Sunnyvale Rod & Gun is open until 9PM tuesdays.

_________________
FN SCAR 17S, Kimber Tactical Custom II, Kriss Vector CRB, Kahr PM9, M1 Garand (CMP HRA SGS)
avatar
Xn0r

Posts : 98
Join date : 2012-08-16
Age : 49
Location : Santa Clara, CA (Silicon Valley)

Back to top Go down

Re: Hello from Concord, CA

Post by ecuadorian on Sat Dec 01, 2012 5:10 pm

Do they let u shoot the vector indoors in sunnyvale??? because in san leandro they ask me shoot it outside.... I may go check that out next tuesday.

ecuadorian

Posts : 8
Join date : 2012-11-29
Age : 35
Location : Concord, CA

Back to top Go down

Re: Hello from Concord, CA

Post by Xn0r on Sun Dec 02, 2012 1:50 am

Sunnyvale is an outdoor range. 100 yds + shotgun skeet range.

I shoot my Vector indoors all the time at Target Masters though, and I suspect Reeds wouldn't have a problem either.

_________________
FN SCAR 17S, Kimber Tactical Custom II, Kriss Vector CRB, Kahr PM9, M1 Garand (CMP HRA SGS)
avatar
Xn0r

Posts : 98
Join date : 2012-08-16
Age : 49
Location : Santa Clara, CA (Silicon Valley)

Back to top Go down

Re: Hello from Concord, CA

Post by P1X4R on Sun Dec 02, 2012 8:25 pm

glad to hear PMC works well. i believe it's on the approved list.

http://www.kriss-usa.com/compatible-ammunition

it's what i mainly buy online from cabela's.

btw, check out richmond rod and gun club (outdoor range). it's about 20min from emeryville.

P1X4R

Posts : 10
Join date : 2012-11-23
Age : 46
Location : Kalifornia

Back to top Go down

Re: Hello from Concord, CA

Post by mambro on Mon Dec 03, 2012 2:37 am

ecuadorian wrote:I'm new here and happy new owner of a Kriss Vector crb.
Welcome to the forum and congrats on the CRB! Smile

welcome1
avatar
mambro
MOD

Posts : 604
Join date : 2012-01-08
Location : McKinney, TX

Back to top Go down

Re: Hello from Concord, CA

Post by ecuadorian on Mon Dec 03, 2012 3:11 am

If you are allowed to shoot indoors there, I'll be going there next week. Need more time with the vector..... (not enjoying too much the seized fire in outdoor ranges) Find out today my front sight needed adjustment, I was shooting low.....about 10 inch at 15 yards... wtf so I managed to adjust it without tools.... just using two 223's from my AR 15, which proves the vector is pretty simple to operate and to adjust. After that, it was a walk in the park hitting the center of target and still tight group at 25 yards, I was only using iron sights, so I hoping if I get an eotech or aimpoint it could be better, easier and faster..... I just don't know which one to get scratch ..........

ecuadorian

Posts : 8
Join date : 2012-11-29
Age : 35
Location : Concord, CA

Back to top Go down

Re: Hello from Concord, CA

Post by ecuadorian on Mon Dec 03, 2012 3:22 am

P1X4R wrote:glad to hear PMC works well. i believe it's on the approved list.

http://www.kriss-usa.com/compatible-ammunition

it's what i mainly buy online from cabela's.

btw, check out richmond rod and gun club (outdoor range). it's about 20min from emeryville.


Yes, pmc works good!!! had about 300 rnds as of today, no problems!!! Used 100 rnds of blazer aluminum 45 acp 230gr fmj and didn't notice any difference or malfunctions, not that I recommend that brass..... I'm just saying.....

ecuadorian

Posts : 8
Join date : 2012-11-29
Age : 35
Location : Concord, CA

Back to top Go down

Re: Hello from Concord, CA

Post by CatMostFeared on Mon Dec 03, 2012 4:10 am

Welcome to the forum welcome2
avatar
CatMostFeared
Admin

Posts : 799
Join date : 2012-01-05
Age : 48
Location : Kentucky

http://www.krisstalk.com

Back to top Go down

Re: Hello from Concord, CA

Post by ecuadorian on Mon Dec 03, 2012 4:49 pm

[quote="mambro"]
ecuadorian wrote:I'm new here and happy new owner of a Kriss Vector crb.
Welcome to the forum and congrats on the CRB! Smile

Thanks!!!! I'm Glad we have a site about our "little friend V"

ecuadorian

Posts : 8
Join date : 2012-11-29
Age : 35
Location : Concord, CA

Back to top Go down

Re: Hello from Concord, CA

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum