KWA Lower housing swap

View previous topic View next topic Go down

KWA Lower housing swap

Post by Solscud007 on Sun Apr 07, 2013 9:30 pm

So I got my FDE lower housing and swapped it onto my KRISS Carbine. Used the spare KRISS lower housing and swapped it onto my KWA KRISS Vector.

This swap was a LOT easier than the upper swap.

I followed the Armorer's Course. There are some aspects not mentioned in there. You need to remove the mag catch, the last round bolt catch, and the charging handle return spring anchor.
I only have one problem and that is the hook anchor for the charging handle return spring. The real steel one was easy to unscrew. But the KWA version would not come out. I will need to order a replacement from KRISS USA.


KWA Housing on top and Real KRISS housing on bottom.




Naked KRISS Carbine lower.


KWA KRISS with lower installed. Now the only KWA Airsoft parts are the internals. All exterior parts are from Real KRISS Vector.




_________________
Most of the information I find and collect about the Kriss is documented on my facebook page.
http://www.facebook.com/pages/Kriss-Super-V/157275704339968
avatar
Solscud007
MOD

Posts : 1580
Join date : 2012-01-05
Age : 37
Location : Pittsburgh, PA

http://www.facebook.com/pages/Kriss-Super-V/157275704339968?sk=w

Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum