Carbine owners. Shoot without shroud?

View previous topic View next topic Go down

Carbine owners. Shoot without shroud?

Post by Solscud007 on Fri Mar 09, 2012 1:49 pm

Hey you Vector Carbine owners. I want to get a larger test grouping. I only tried it once, back in May 2010 at my Tactical Carbine class. My 50 yd zero was completey screwed and off paper when i removed the shroud. Putting the shroud back on corrected the problem.

If you guys are going out to shoot. try shooting with the shroud off and see how your groups are. Ideally at distance and then do it with the shroud on. Im curious if the rounds are consistent with the shroud off, or if it is wild with the shroud off.

_________________
Most of the information I find and collect about the Kriss is documented on my facebook page.
http://www.facebook.com/pages/Kriss-Super-V/157275704339968
avatar
Solscud007
MOD

Posts : 1580
Join date : 2012-01-05
Age : 37
Location : Pittsburgh, PA

http://www.facebook.com/pages/Kriss-Super-V/157275704339968?sk=w

Back to top Go down

Re: Carbine owners. Shoot without shroud?

Post by mambro on Fri Mar 09, 2012 2:03 pm

For those that do the test, be sure to have Loctite for reassembly and watch out not to tear up the o-ring. Smile
avatar
mambro
MOD

Posts : 604
Join date : 2012-01-08
Location : McKinney, TX

Back to top Go down

Re: Carbine owners. Shoot without shroud?

Post by Solscud007 on Fri Mar 09, 2012 2:04 pm

Bah. I dont use Loctite. hehe. Seriously I dont. I havent noticed any problems and I hold the shroud when I shoot now.

_________________
Most of the information I find and collect about the Kriss is documented on my facebook page.
http://www.facebook.com/pages/Kriss-Super-V/157275704339968
avatar
Solscud007
MOD

Posts : 1580
Join date : 2012-01-05
Age : 37
Location : Pittsburgh, PA

http://www.facebook.com/pages/Kriss-Super-V/157275704339968?sk=w

Back to top Go down

Re: Carbine owners. Shoot without shroud?

Post by drowe26 on Wed Aug 21, 2013 6:27 pm

I recent received a Form 1 to convert my Kriss CRB to an SBR. I had someone that was going to cut it down for me, but he no longer can do it. I talked to Kriss and they cannot receive a non-SBR with a Form 1 and then convert it to SBR. However, I can cut it down to an SBR and send it to them for a factory installed SBR barrel. I need some advice on how to cut it down to an SBR. The first step would be removing the shroud. Then... I could do something as crude as take a hacksaw to it. As long as it is an SBR then Kriss will accept it and replace the barrel anyway.

How do I remove the shroud? Any other advice?

Thanks
Dave
avatar
drowe26

Posts : 6
Join date : 2013-08-21
Age : 41
Location : Austin, Texas

Back to top Go down

Re: Carbine owners. Shoot without shroud?

Post by drowe26 on Wed Aug 21, 2013 6:55 pm

I found it... Page 11
http://www.kriss-arms.com/pdf/armorer_guide/KRISS_Armorer's_Course_2012.pdf
avatar
drowe26

Posts : 6
Join date : 2013-08-21
Age : 41
Location : Austin, Texas

Back to top Go down

Re: Carbine owners. Shoot without shroud?

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum