K10 SMG with Defiance Suppressor

No stats yet on the can performance, but here's a glamour shot:


This one shows "Made in Switzerland" unlike the KRISS USA latest press release photos that show one made in Virginia Beach. The holes in the front are cosmetic "dimples". Don't know why they chose the old school "Super V" sights either.



http://www.kriss-usa.com/defiance/hps-4gsk-cal-45acp

You ever notice that they like to show the right side of the K10? I can never find a pic of the left side. I'm curious where the bolt catch is. It has to be relocated otherwise locking the bolt will require you to remove your hands from fire control. Very stupid. Kinda like a AR-15 unless you have a BAD lever.

Check out this thread --> http://www.krisstalk.com/t38-k10-from-shot-show-2011

It has the left hand pic and videos where KRISS Arms says the bolt release/catch is in the center of the foregrip (area) @ 5:18 in the first video and 1:15 into the second video. My *guess* is that it is the top button on the left side of the prototype.

mambro wrote:Check out this thread --> http://www.krisstalk.com/t38-k10-from-shot-show-2011

It has the left hand pic and videos where KRISS Arms says the bolt release/catch is in the center of the foregrip (area) @ 5:18 in the first video and 1:15 into the second video. My *guess* is that it is the top button on the left side of the prototype.

Haha I feel stupid. That is my picture I shot at Shotshow.

The button behind the selector switch, is the detent for the stock to slide out. Other than that I dont see any other conventional controls. No one seems to be asking the questions I am. I keep getting the same BS from KRISS. "Technical aspects will not be released"

Really? You cant answer a simple question of "Where is the bolt catch/Release?"

Solscud007 wrote:"Where is the bolt catch/Release?"

I think it's the "upper" white/grey-ish button stacked on top of the left-hand magazine release in that pic (copied below):



The magazine release was mentioned as being ambi, so I don't think it's the "lower" button in that shot. Other pics show that lower button on both sides. For conventional controls, the "safety" was mentioned in the video to be incorporated into the selector, so for non-SMG use, that probably means safe is upper most position, down to fire. Were there other controls you were looking for?

So if the silver buttons aren what you say they are ( I suspect the one above the mag release may be bolt release) The K10 will require two handed operation.